Batt-man digital dashboard

Batt-man digital dashboard has 3 screens:

Main screen

• Speedometer- displays speed in the desired measurement units (km/h, mph).


• Trip odometer- displays driving distance since it was last reset.


• Graphical fuel gauge- a visual way to indicate how much battery power is left.

Battery meter screen

• Current- displays the instantaneous Amperes flowing in the system.


• Voltage- displays battery voltage.


• Discharge- displays the accumulated Amp-hours drawn since it was last reset.


• Power- displays the instantaneous power of the system. (* when there is no current this field shows Wh).

Peak data screen

• Max Amps- displays the maximum recorded Amps.


• Min Voltage- displays the minimum measured battery voltage.


• Top speed- displays the maximum recorded speed.


• Max Watts- displays the maximum recorded power.

Dimensions:

Batt-man digital dashboard GUI(Graphical User Interface):

Batt-man digital dashbord has a USB interface, for easy setup, logging uploads and firmware updade.

Settings screen

Totals:

• "Read total" - reads the accumulated values stored in Batt-man's internal flash.


• "Reset" - resets the accumulated values stored in Batt-man's internal flash, use it when replacing a battery or installing the Batt-man on a new vehicle.

Setup:

• "Program" - sends the values selected to Batt-man's memory


• "Read" - Reads current settings from Batt-man's memory (called automatically when connected)


• "Wheel diameter" - set your wheel diameter or circumference, for the speedometer.


• "Battery capacity" - set your total battery capacity (XX.XXXAh). Batt-man will use this setting to calculate the amount of charge left in the battery.

Logger screen

Batt-man records the following real time values, while driving:
Voltage (red graph), Amperes (blue graph) and speed (green graph).
The logger will reset when the user resets Batt-man, you can log up to 1:30 hours of travelling.
The logger records data only when the speed is greater than zero or the discharge is greater than 300ma. The logger does not record when the device is connected to the USB.

Advanced screen

Upgrade:

• "Upgrade firmware" - use this button to change Batt-man's firmware, when new firmware is available.

Calibration:

• "Program" - sends the values selected to Batt-man's memory


• "Read" - Reads current settings from Batt-man's memory (called automatically when connected)


• "load defaults" - every Batt-man is manually calibrated, these default calibration settings can always be retrieved.


• "Shunt resistance" - the value in milliohms of your shunt.(*)


• "Shunt offset" - if your Amps reading is not 0 when there is no load, add the Amps reading to this value in order to reach 0 reading.(*)


• "Voltage divider" - used to calibrate the voltage.(*)


• "Voltage offset" - used to calibrate the voltage.(*)

* Advanced users use only.

Batt-man digital dashboard manual

Batt-man digital dashboard XL

Dimensions:

How to Purchase:

You can order the product by pay pal, There is a PayPal link at the top of the page. Click on it and you will be taken to our PayPal purchase page.
Shortly after completing the purchase process, we will contact you via e-mail to coordinate the free delivery.
If you have any questions about the product please contact us at:
info@batt-man.com
And our representative will contact you shortly.